Sunbeam Water Cooler Ylr2 5 90hz3 Manual
Sunbeam Water Cooler YLR2-5-90HZ3 Manual
If you are looking for a water dispenser that can provide cold, hot and room temperature water, as well as a cooling compartment for storing beverages and snacks, you might want to consider the Sunbeam Water Cooler YLR2-5-90HZ3. This water cooler has a sleek design and a child-resistant hot water guard to prevent accidental burns. It also has LED indicator lights to show when the water is cooling or heating. In this article, we will provide you with some information on how to use and maintain your Sunbeam Water Cooler YLR2-5-90HZ3.
sunbeam water cooler ylr2 5 90hz3 manual
How to Use Your Sunbeam Water Cooler YLR2-5-90HZ3
Before using your water cooler for the first time, you need to follow these steps:
Your water cooler must be left upright for at least ten (10) hours, unplugged. During delivery and/or storage, the fluid inside the compressor will move. To avoid any damage to the unit, you must allow adequate time for the fluid to settle.
Make sure to fill one 12 oz glass of water from each tap before plugging in the unit. This will flush out any air bubbles or dust that may have accumulated in the water lines.
Plug the power cord into a grounded electrical outlet and turn on the cold water and refrigeration power switch at the back of the unit. The cooling on LED indicator light will turn on.
Turn on the hot water power switch at the back of the unit. The heating on LED indicator light will turn on. It will take about 15 minutes for the water to reach the desired temperature.
Fill the bottle with tap water or filtered water and place it on the bottle support collar. Make sure the bottle cap is pierced by the bottle probe.
Enjoy your cold, hot or room temperature water by pressing the corresponding handle. The cold water handle is blue, the hot water handle is red and has a child-resistant lock, and the room temperature water handle is white.
How to Clean and Maintain Your Sunbeam Water Cooler YLR2-5-90HZ3
To keep your water cooler in good condition, you need to clean and sanitize it regularly. Here are some tips on how to do that:
Unplug the power cord and remove the bottle from the unit.
Drain any remaining water from the taps and from the cooling compartment by opening the drain cap at the back of the unit.
Prepare a sanitizing solution by mixing one teaspoon of unscented household bleach with one gallon of water.
Pour some of the sanitizing solution into the bottle support collar and let it flow through the taps. Repeat this process for each tap.
Wipe the exterior of the unit with a soft cloth dampened with some of the sanitizing solution. Pay special attention to the taps and handles.
Rinse the bottle support collar and taps with clean water. Drain any excess water from the unit.
Replace the bottle with a fresh one and plug in the power cord. Turn on the switches and wait for the water to reach the desired temperature.
You can also download a copy of the owner's manual for more detailed instructions and troubleshooting tips from [here].
Sources
: Sunbeam YLR2-5-90HZ3, YLR2-5-90CH3 Owner's manual Manualzz